Home / Shoe Manufacturer / Waterproof Shoes
OEM / ODM · Waterproof Shoe Manufacturer
Waterproof Shoe Manufacturer
Waterproof footwear is one of our deepest specialities. We build breathable waterproof shoes and boots using membrane bootie construction with seam-sealed (taped) joints, and we water-pressure test every single pair before it ships — a level of waterproof QC few factories run in-house.
Who makes genuinely waterproof footwear?
DOING builds waterproof shoes and boots using membrane bootie construction with seam-sealed joints, and water-pressure tests every single pair to 10,000 mm before shipment. OEM/ODM in Quanzhou, China; MOQ 1,200 pairs/style, samples in 2–4 weeks.
Our waterproof shoes capabilities
- Waterproof membrane bootie construction
- Seam-sealed / taped-seam waterproofing
- Breathable waterproof linings
- 100% water-pressure testing of every pair
- Outdoor, work, rain & winter applications
Styles we manufacture
As a waterproof shoe manufacturer — a direct waterproof shoes factory and supplier rather than a broker, and the exporter of record on your shipment — we cover Membrane Bootie Footwear, Seam-sealed Waterproof Boots, Breathable Waterproof Shoes and more, developed to your design and target price.
Every style below can run as OEM (you supply the design and spec), ODM (you pick from our developed styles and we adapt them), private label (our build, your brand) or full-custom development from a sketch or reference sample.
- Membrane bootie construction
- A sealed waterproof-breathable bootie inside the shoe, with taped or welded seams. This is the build that actually keeps water out, as opposed to a water-repellent finish that stops working after a few washes.
- Waterproof hiking shoes and boots
- Membrane builds with sealed seams and lugged outsoles for wet trails — see our hiking and outdoor page for the rest of that range.
- Waterproof work footwear
- Wet-site industrial builds: waterproof upper, oil-resistant outsole, and protective toe or plate where the spec calls for it.
- Rain and winter city shoes
- Everyday waterproof footwear where the shoe still has to look like a city shoe rather than a boot. Membrane plus a treated leather or synthetic upper.
- Hunting and fishing footwear
- Higher shafts, quiet uppers and full waterproofing. Often paired with insulation, which changes the outsole compound choice for cold conditions.
- Water-repellent vs waterproof
- A DWR finish repels; a membrane keeps water out. We will tell you which one your price point supports, and we will not let a repellent-finish shoe be sold as waterproof — that is a returns problem waiting to happen.
- 100% water-pressure testing
- Every single pair is water-pressure tested to 10,000 mm before it ships, not just a sample. Failures are rejected or repaired and retested. This is the part of the process most buyers cannot get from a factory at all.
Materials
- Breathable waterproof membranes
- Treated waterproof leather & synthetics
- Sealed-seam textile uppers
- Waterproof zips & components
See the full footwear materials guide →
Quick facts
| Waterproof rating | Tested to 10,000 mm water pressure |
|---|---|
| Water testing | 100% — every pair tested |
| Construction | Membrane bootie · seam-sealed |
| Product | Waterproof Shoes |
| MOQ | 1,200 pairs/style — split across 2–3 colours (600 × 2 or 400 × 3) |
| Samples before bulk | Yes — approved before production |
| Sample lead time | 2–4 weeks |
| Production lead time | 30–60 days |
| Services | OEM · ODM · Private label |
| Materials | Breathable waterproof membranes, Treated waterproof leather & synthetics, Sealed-seam textile uppers |
| Testing | Physical testing + final AQL inspection before shipment |
| Packaging | Custom retail / poly / carton — your brand, labels & barcodes |
| Shipping | FOB / CIF · sea & air · export docs handled in-house |
| Country of origin | China (Quanzhou, Fujian) |
| Export markets | USA, Canada, Western Europe, Latin America, Middle East, Russia, Central Asia |
Customization
What you can customise
Every waterproof shoes order is built to your brand — OEM to your design, ODM developed with you from concept, or full private label.
- Your logo & branding — debossed, embroidered, printed, woven or moulded
- Custom colourways and material / spec selection to your target cost
- Custom last & fit development for your sizing
- Bespoke outsole / midsole tooling and moulds
- Private-label labels, hangtags, insocks and printed shoe boxes
- Retail-ready packing — barcoding, polybag, inner & outer carton
Applications
Who it's for
- Outdoor & hiking footwear
- Work & industrial footwear
- Rain & winter city shoes
- Hunting & fishing footwear
Waterproof programmes
Specifying waterproof footwear that stays waterproof
Most waterproof complaints at retail come from a spec that never said what "waterproof" means. Write down the construction, the test and the pass mark, and the shoe can be built and checked against them.
Three levels of water protection
| Level | How it is built | What it is good for |
|---|---|---|
| Water-repellent | How it is builtDurable water-repellent finish on the upper | What it is good forLight rain and splashes; wears off over time |
| Water-resistant | How it is builtTreated leather or coated textile, ordinary seams | What it is good forWet grass and short exposure; water gets in at seams and flex points |
| Waterproof | How it is builtMembrane bootie with seam-sealed (taped) joints | What it is good forStanding water and all-day wet use; the level we test every pair for |
How we check it
Every pair on our waterproof builds is water-pressure tested before it ships, to 10,000 mm. For a new programme you can also specify a dynamic flex-in-water test on samples (for example SATRA TM77), which shows how the shoe behaves while it is being walked in — that is where leaks at the flex line show up.
Where waterproof footwear is used
The same construction carries across hiking, work and safety, winter and rain boots and tactical builds. The construction is explained step by step in how to make waterproof shoes, and the German waterproof sneaker case shows it on a lifestyle shoe.
Selected styles
Waterproof Shoes we have manufactured
A few real, unbranded samples we have developed and produced — a sense of the quality and finish we deliver.
Quality, testing & compliance
How we control quality on every waterproof shoe order
Materials and finished shoes are built to documented physical-testing and QC standards — aligned to Chinese national (GB) and international norms — with a 6-stage quality process and final AQL inspection before shipment.
Physical testing
100% water-pressure testing — every single pair is tested to 10,000 mm before it ships, not just a sample; failures are rejected or repaired and retested.
Testing & standards →AQL inspection
Final inspection uses random, non-consecutive AQL sampling with a three-tier defect grade — Class A inspected to a strict AQL 0.065. Any Class A defect rejects the batch.
Factory & QC →Chemical compliance
Built to EU REACH and your own RSL, with accredited third-party lab reports (SGS, Intertek, BV-type) on request — so you import with confidence.
REACH & RSL →Go deeper: how we flex-test finished shoes to 60,000 cycles so soles don’t crack →
How we work
From concept to container
Concept
Share your waterproof shoes design or idea; we advise on construction and cost.
Prototype
Lasts, molds and samples ready in 2–4 weeks.
Production
30–60 days with in-line quality control.
Shipping
Final AQL inspection, then export worldwide.
FAQ
Waterproof Shoes — buyer questions
How waterproof are your shoes?
We build with a waterproof membrane bootie and seam-sealed joints, and test to 10,000 mm water pressure. Ratings can be tuned to your target use — everyday water resistance through to fully waterproof outdoor and work footwear.
Do you test every pair for waterproofing?
Yes. Waterproof styles go through 100% water-pressure testing — every single pair is tested, not just a sample — and any unit that fails is rejected or repaired and retested.
Can waterproof shoes still breathe?
Yes. We use breathable waterproof membranes, so the shoe keeps water out while letting moisture vapour escape — important for comfort in outdoor and work footwear.
What is your MOQ?
Our MOQ is 1,200 pairs per style, which can be split across 2–3 colours. Samples are made and approved so you can validate a waterproof shoe design before committing to a production run.
How long do samples and production take?
Samples take 2–4 weeks; bulk production takes 30–60 days depending on materials and quantity.
Do you offer OEM and ODM?
Both. With OEM we build to your design and specs; with ODM we develop new designs with you from concept. We also do private-label branding, labels and packaging.
Related categories
Hiking & Outdoor Shoe Manufacturer
Hiking, trekking & outdoor footwear — durable, grippy, waterproof options.
View hiking & outdoor shoes →Boot Manufacturer
Boot manufacturing — fashion, winter, rain, snow and Chelsea styles.
View boots →Safety Shoe Manufacturer
Safety & work footwear — steel/composite toe, slip-, oil- and puncture-resistant, for industry and service.
View safety & work footwear →Military & Tactical Boot Manufacturer
Military, tactical & duty boots — oil- and slip-resistant outsoles, waterproof and toe-protection options, built to spec.
View military & tactical →Get a quote for your waterproof shoes
Tell us your design, target market and quantity — our team replies with real feasibility, lead time and pricing.
Get a Quote